Pages

▼

Friday, 20 May 2016

Piping Fabrication Procedure


Piping Fabrication Procedure:

  1. Marking shall be done according to drawing requirement and the same shall be checked by concerned supervisor prior to cutting.
  2. The cutting shall be generally done as follows:
                                          i.    Carbon Steel pipes          -          By gas cutting & grinding.
                                        ii.    Alloy Steel pipes              -          By grinding or flammable cutting.
                                       iii.    Stainless Steel Pipes       -          By grinding or plasma cutting.
  1. Before cutting the pipe Heat Number will be transferred to the cut pieces by low stress dye stamping, Paint marking or Tagging.
  2. End preparation and fit-up shall be done at shop as per the approved Specification and WPS.
  3. Care shall be taken to make sure that longitudinal seams on the joining pipes will not come in one line in a butt joint. Seams will be staggered at least 100mm apart and also will clear the branch connections. Care shall be taken to make sure that longitudinal seams are not resting on the steel structure.
  4. Pipes and Fittings for fit-up will be placed on temporary pipe bed and will make sure that supports are secured properly.
  5. Welding of the joint will be done after getting QC fit-up Inspection clearance and the same shall be offered for Client inspection randomly.
  6. All flange connected to equipment shall be tack welded only.
  7. Line No, Component Heat No., Joint No., Fit-up inspection signature, Welder No., Visual inspection signature and date of welding will be marked near to the joint with metal paint marker.
  8. Spool No. will be marked with paint marker and aluminum tag will be tied to the spool. Fabrication completed spools will be shifted from shop to lay down area.
  9. NDT shall be performed as required by Project specification. After NDT clearance, spools shall be released for erection / painting with release notice.
  10. NDT rejected spools will be identified with yellow I black tag and the repair will be done immediately and NDT will be executed on repaired weld areas as required.
  11. After painting, field inspection shall be offered for QC and the same shall be QC recorded in the prescribed format.
  12. After painting inspection, the spool shall be released for erection.
  13. Stainless Steel fabrication will be done in the shop with an isolated area from carbon steel and alloy steel.
  14. No tools, tackles, equipment will be used for SS which has been used for CS. All tools and equipment dedicated to SS work shall be clearly marked "For Stainless Steel" only.
  15. For Stainless steel materials, stainless steels tools will be used for grinding, brushing and clamping etc.
  16. Pre heating and PWHT will be done at shop and field as per specification requirements.
  17. All flanged raised faces of completed spools will be fitted with plywood blinds for protection and spool ends shall be fitted with proper caps         
   .
at

6 comments:

  1. Better Life19 March 2019 at 11:38

    helpful article, keep it growing.

    ReplyDelete
  2. Intern24 June 2019 at 07:39

    Your work is very engaging! Amazing piece and is worth reading and sharing. Hoping for more of this kind of work of yours author. Meanwhile. If you are interested and looking for blinds fabricationFeel free to check and visit our site and look for our affordable items with a very nice quality. Thank you and Godbless!

    ReplyDelete
  3. MaintenanceRepairServicellc16 January 2020 at 17:01

    Great Article… I love to read your articles because your writing style is too good, its is very very helpful for all of us and I never get bored while reading your article because, they are becomes a more and more interesting from the starting lines until the end.

    hydraulic services

    ReplyDelete
  4. MaintenanceRepairServicellc30 January 2020 at 13:33

    This is a blog to watch for sure. I think you have a really awesome writing style by the way. Very easy to read. Your blog design is so clean too! Thank you all the hard work!

    Shear's Beam lines

    ReplyDelete
  5. Andrea Lim20 August 2021 at 18:01

    This comment has been removed by the author.

    ReplyDelete
  6. mywelders13 July 2024 at 11:54

    The pipe fabrication process involves precise steps like marking, cutting, and fit-up inspections to ensure quality. Stainless Steel work is strictly segregated from carbon and alloy steels to prevent contamination. Each joint undergoes rigorous QC checks and NDT before being released for erection, with dedicated tools for Stainless Steel to avoid cross-contamination, crucial for pipe fabrication projects.

    ReplyDelete