SUPPORTING
ELEMENTS:
ANCHOR:
A special supporting device for restraining pipes in position and direction to permit the control of pipe movement which occurs due to thermal expansion.
CLEVIS PIPE CLAMP:
A pipe supporting device used only for non-insulated pipes.
CONSTANT LOAD SUPPORT:
A spring loaded support designed to enable the load on the pipe to be constant and balanced regardless of the vertical movement that may take place.
GUIDE:
A device for ensuring a pipe is restrained from moving in a direction (or) plane other than that warranted by ideal design conditions.
ANCHOR:
A special supporting device for restraining pipes in position and direction to permit the control of pipe movement which occurs due to thermal expansion.
CLEVIS PIPE CLAMP:
A pipe supporting device used only for non-insulated pipes.
CONSTANT LOAD SUPPORT:
A spring loaded support designed to enable the load on the pipe to be constant and balanced regardless of the vertical movement that may take place.
GUIDE:
A device for ensuring a pipe is restrained from moving in a direction (or) plane other than that warranted by ideal design conditions.
HANGER:
A method of supporting pipe work from a
structure above, usually maintaining the pipe work at a designed level but
allowing limited axial and sometimes, lateral movement.
RESTRAINT:
A (pipe work) supporting device that
partially (or) totally restricts movement in one (or) more directions.
ROLLER SUPPORT:
A roller, on which the pipe rests,
permitting axial movement in a horizontal plane.
SLIDER SUPPORT:
A special pipe support designed to permit
longitudinal movement of the pipe work in a horizontal plane.
SPRING HANGER:
A pipe support designed to counteract
differing positions as a result of the varying conditions to which the piping
is subjected.
STANCHION:
A structural steel member whose main
function is to withstand axial compressive stresses.
TRESTLE:
A structural steel frame usually designed
to carry a bank of pipes above ground level
TRUNNION:
A tubular piece of steel welded to the
side of a pipe to enable the latter to be supported.
TURN
BUCKLE:
A device for providing axial adjustment
for pipe hanger rods – adjustment is achieved by the turn buckle having right
and left handed threads.
SHOE:
A metal piece attached to the under side
of a pipe which rests on supporting steel.
Primarily used to reduce wear from sliding for lines subject to
movement. Permits insulation to be
applied to pipe.
![](https://4.bp.blogspot.com/-uqh5aQXeXIc/Vz7GQ__Yb2I/AAAAAAAAAYY/4xa_rFZguxA4pkIi4YumDlYL8Aw0ioNbACK4B/s320/66.png)
![](https://2.bp.blogspot.com/-qxjIlCxL06Y/Vz7GRkrnHDI/AAAAAAAAAYs/ppQDFwkLmLABu0EOkuX9wbu0rHpaolZXACK4B/s320/68.png)
![](https://1.bp.blogspot.com/-1pjGx27vbLM/Vz7GSHdEZ0I/AAAAAAAAAZA/wKfYWapAPz8ClMB0t6VvGeYauYg8CCDxwCK4B/s320/67.png)
![](https://1.bp.blogspot.com/-BHuwp4WHEyw/Vz7GRnB2-HI/AAAAAAAAAYw/myZayiXRKbQNXGv4Is8hjdp0934SiXjDgCK4B/s320/70.png)
![](https://1.bp.blogspot.com/-4olYRv2wKng/Vz7GRXq3etI/AAAAAAAAAYg/SAA3_OaVF9sX2oyN2OLoIbot7xa0rzDIgCK4B/s320/69.png)
![](https://4.bp.blogspot.com/-uqh5aQXeXIc/Vz7GQ__Yb2I/AAAAAAAAAYY/4xa_rFZguxA4pkIi4YumDlYL8Aw0ioNbACK4B/s320/66.png)
![](https://2.bp.blogspot.com/-qxjIlCxL06Y/Vz7GRkrnHDI/AAAAAAAAAYs/ppQDFwkLmLABu0EOkuX9wbu0rHpaolZXACK4B/s320/68.png)
![](https://1.bp.blogspot.com/-1pjGx27vbLM/Vz7GSHdEZ0I/AAAAAAAAAZA/wKfYWapAPz8ClMB0t6VvGeYauYg8CCDxwCK4B/s320/67.png)
![](https://3.bp.blogspot.com/-oZPRnbh8Nr4/Vz7GSK-q3zI/AAAAAAAAAY4/Y6U0V5CKgmcgCdtmQIJebq1ezxMbk1tqgCK4B/s320/71.png)
![](https://1.bp.blogspot.com/-BHuwp4WHEyw/Vz7GRnB2-HI/AAAAAAAAAYw/myZayiXRKbQNXGv4Is8hjdp0934SiXjDgCK4B/s320/70.png)
![](https://1.bp.blogspot.com/-4olYRv2wKng/Vz7GRXq3etI/AAAAAAAAAYg/SAA3_OaVF9sX2oyN2OLoIbot7xa0rzDIgCK4B/s320/69.png)
No comments:
Post a Comment